Can I recover my own center console?
Maybe. It depends on your car. Some consoles come apart easily and you can recover them yourself. Others are complicated and need an upholstery shop or the dealer. Inspect yours first, then decide.
Start by inspecting it
- Look at how the lid or armrest attaches. Visible screws are a good sign. Hidden clips, wiring, or trim that has to come off first are not.
- Search your exact year, make, and model for a removal article or video, then judge how much work it looks like.
- If it comes off in a few simple steps, it’s a good DIY job. If it doesn’t, stop and call a shop.
How hard is it?
- Tend to be easier: Honda, Acura, Toyota, Nissan, and Subaru.
- Tend to be harder: European models and luxury models like Cadillac and Lincoln. Many are best left to an upholstery shop or the dealer.
Every model is different, so check yours before you buy anything. Pre-made covers exist for many models, so look for yours before you cut your own material.
Before you start
- Unplug anything electrical (USB ports, switches, wireless charger) before you pull the piece.
- Check that the plastic base, hinge, and latch are solid. A new cover won’t fix a cracked or broken part.
How the job goes
- Remove the lid from the car and work on a bench.
- Peel off the old cover. Replace the foam if it’s crumbled or flat.
- Clean old glue and dust off the plastic.
- Glue the foam to the plastic with a high-temp adhesive.
- Lay the new cover over the foam and wrap from the center out, pulling evenly. Do the corners last.
Don’t glue the vinyl or leather to the top of the lid. It needs to float over the foam. Use the high-temp glue only to glue the foam and to hold the edges of the cover on the inside of the lid plastic. A heavy-duty staple gun with short staples that won’t blast through the plastic can hold those edges too.
What not to do
- Don’t use low-heat glue. Cars get hot and it will creep and bubble.
- Don’t glue the cover down across the top of the lid. Glue the foam and the inside edges only.
- Don’t use long staples.
- Don’t force a lid that won’t come apart.
When to call a pro
If yours is complicated, European, a luxury model, wired, or won’t come apart, or you’d rather not risk it, take it to an upholstery shop. Any local shop should be able to do this. Get a quote first.
If you don’t want to do either and just want a cheap fix that adds a little cushion, a padded cover that slips over the old one is an option. It covers wear. It doesn’t repair a broken lid.
Helpful next step
Affiliate disclosure: Some links below are affiliate links. If you buy through them, AutoInteriorHelp may earn a commission at no extra cost to you. Product recommendations are based on the repair situation, not on which link pays the most. As an Amazon Associate I earn from qualifying purchases. Details.
- For the foam and the inside edgesCheck price (paid link)
3M Hi-Strength Spray Adhesive 90 (inverted can)
A strong spray adhesive for gluing the foam to the lid and holding the cover's edges on the inside of the plastic. Don't glue the cover across the top. Its listed heat resistance is 130°F. This can sprays upside down only. Some listings say it isn't sold in California, so check that it ships to you.
- Cheap fix that adds cushionCheck price (paid link)
Padded slip-over console lid cover
Slips over the old cover and adds a little padding without taking anything apart. It won't repair a cracked lid or sagging foam underneath, and it won't look like a factory recover. This one is listed as Nappa leather, waterproof and anti-slip. Check the listing for what it's really made of. Check the listing's size against your lid before you order.
Prices change. Check the listing for today's price.
General information, not professional advice. Costs are examples. See our Terms of Use.